As low as $237.24/mo with or . (Pay in 4 interest-free payments)
The 551G gear drive camshaft kit is a bolt-in cam set for stock or mildly modified touring bikes, designed for engines of 96 to 106 CID with 9:1 to 9:9 compression. Reverses the rear cam's direction of rotation, adding operating clearance between cam lobes so higher cam lifts are possible More power across the rpm range, with better low and midrange torque that is strongest from 1,000-4,000 rpm Valve timing is more accurate because timing chain lash and the loosely fit stock chain are eliminated Installation means removing material from the inner surface of the stock gear cover, and a hydraulic press and other professional level tools are required Cam bearings and gaskets must be replaced along with the cams, and S&S recommends an adjustable pushrod/cover kit Compression ratios of 10:1 or higher are not recommended Inner gears, outer gears, inner and outer bearings, gaskets and instructions come in the box Clearances for coil bind, valve to valve and valve to piston must be checked, and gear drives can bring more valve train noise Manufactured in the USA