Replacing the factory ECM, the ThunderMax ECM with integral Auto-Tune plugs into the existing harness. Wide-band oxygen sensors feed a closed-loop control system that continually self-adjusts the motorcycle's air/fuel ratio for any riding conditions. The kit includes the ECM with its Auto-Tune Module, a plug-in harness, two wide-band sensors, TMax software, a USB communication cable, a Quick-Start Easy Install guide, the Comprehensive User's Manual, plus technical support and free software and updates. Installation steps: take out the factory ECM, fit the new oxygen sensors and harness, load the right map for your bike, then ride. You can download from hundreds of maps matched to your bike by model, engine size, exhaust system, air cleaner, pistons, cams and so on. Pick one, load it, and the integral auto-tune handles what follows. Through the software you can watch live readings and record or examine datalogs and diagnostic codes, covering things like number of starts, engine temperature and rpm operation. Maps for front and rear cylinder AFR, ignition timing (spark) and startup are adjustable. The rider can also change idle speed, rev limit and speedometer calibration. You get better throttle response, exhaust sound and driveability, and dyno tuning is not required. It is compatible with high-performance camshafts and all popular exhaust systems, and it supports turbo, nitrous and supercharger applications. There is no charge for new maps, software, firmware updates, map analysis or tech support online. Made in the USA.